REMOVEDOR AQ-150     Alkaline stabilized solution to rapidly and completely remove aqueous dry film photopolymers from fine line printed circuits boards without any darkening to the tin-lead etch resist. It works between 45 and 50 °C, in 2 to 4 minutes by immersion or 1,5 minutes by spray.           REMOVEDOR AQ-20     A low costs alkaline solution for the fast removal of aqueous dry film photopolymers from printed circuit boards without any darkening or attack to the tin-lead etch resist. It works between 40 and 50 °C, in 2 to 4 minutes by immersion.           REMOVEDOR AQ-50     An alkaline solution for a fast  aqueous dry film removal. It works between 45 and 55 °C, in 1 to 3 minutes by immersion or in one and a half (1,5) minutes by spray.           REMOVEDOR AQ-60     An alkaline solution for a fast  aqueous dry film removal. It does not stain neither oxide the copper. It works between 45 and 55 °C, in 1 to 3 minutes by immersion or in one and a half (1,5) minutes by spray.           REMOVEDOR AQ-100 SN     An alkaline solution for a fast  aqueous dry film removal  from printed circuit boards, with shinny or mat tin deposit  on it, free from any atack or darkening. It works between 45 and 55 °C, in 2 to 4 minutes by immersion.           REMOVEDOR AQ-200 AL     It is a stabilized alkaline solution developed to quickly remove the aqueous dry-film and the photosensitive without attacking or darkening the aluminum or the bright tin.           REMOVEDOR B-200     The REMOVEDOR B-200 is a stabilized alkaline solution developed to remove the film residues impregnated on the developing machine.It strips the film residues into small pieces that after shall be manually removed.